Fieldbus Instruments

NCS-TT106 Temperature Module supports FF Hl, PROFIBUS PA and HART protocoIs and multiple temperature sensors. With independent R&D communication controller, it has become a fieldbus temperature transmitter with high performance.

4-20ma Profibus Converter Conversion Device Converter
NCS-FI105 fieldbus to current Converter is used to convert fieldbus signals to conventional analog signals. It can receive fieldbus signals, and convert them to 4-channel 4~20mA analog signals. NCS-FI105 is the converter between fieldbus system and control valve/other actuator.

As intelligent transition device, NCS-IF105 converter receives 0~20mA or 4~20mA analog signal (4 channels) and converts into fieldbus signal. NCS-FI105 converter uses digital communication technology, and makes the interface between field device and controller easier, and reduces the expense of installation and maintenance.

NCS-TT108F/P temperature transmitter
1.Dual channel 4 types of thermal resistance and 8 types of thermocouple
2.Thermal resistance supports 2-wire and 3-wire
3.Cold junction compensation accuracy of voltage signal can reach ±1.0℃
4.High precision ( grade 0.1), low temperature drift ( ±50ppm/℃)
5. FF: FCG (FF ITK6) interoperability test, intrinsically safe, explosion-proof certification
6. PA: conform to PROFIBUS PA version 3.02

As a new generation of smart fieldbus Pressure Transmitter, NCS-PTlOSII series Pressure Transmitter with capacitance sensor is available on FF Hl, PROFIBUS PA and HART protocoIs. The Pressure Sensor has high accuracy, better reliability and intrinsically safety.
Four type Pressure Transducer can satisfy most requirements: Gauge Pressure Transmitter, Absolute Pressure Transmitter, Differential Pressure Transmitter and Differential Pressure Transmitter For High Static Pressure. of course, we can provided Pressure Transmitter's OEM services.

NCS-TT106 temperature transmitter supports FF H1(Foundation Fieldbus) HART and Profibus PA protocoIs and multiple temperature sensors. With independent R&D communication controller, it has become a fieldbus temperature transmitter with high performance.
1.Support multiple thermal resistances and thermocouples
2.Thermal resistance supports 2/3/4-wire connection mode
3.Thermocouple can use cold end compensation function

NCS-TT106 smart temperature module, using the fieldbus technology, is a new generation of smart fieldbus temperature transmitter and it is an indispensable field device for process control. NCS-TT106 transmitter integrates abundant function blocks and realizes not only general measurement function but also complicated control strategy.

Analog Current Signal to Fieldbus Converter,as intelligent transition device, NCS-IF105 converter receives 0~20mA or 4~20mA analog signal (4 channels) and converts into fieldbus signal. NCS-FI105 converter uses digital communication technology, and makes the interface between field device and controller easier, and reduces the expense of installation and maintenance.

NCS-TT105 temperature transmitter is a new generation of smart transmitter with FF Hl, PROFIBUS PA or HART technology. NCS-TT105 transmitter integrates abundant function blocks and realizes not only normal measurement function but also complicated control strategy.