Fieldbus Instruments

NCS-TT106 Temperature Module supports FF Hl, PROFIBUS PA and HART protocoIs and multiple temperature sensors. With independent R&D communication controller, it has become a fieldbus temperature transmitter with high performance.
1. Support 4 types of thermal resistance and 8 types of thermocouple
2. Thermal resistance supports 2-wire, 3-wire and 4-wire
3. The cold junction compensation accuracy of thermocouple can reach ±0.15 ℃
4. High precision (better than grade 0.1), low temperature drift (better than ±50ppm/℃ )
5. FCG interoperability test certification (ITK 6) and PNO interoperability test certification (PA profile 3.02), comply with HART 7
6. CE, explosion-proof (intrinsically safe, flameproof) certification

As intelligent transition device, NCS-IF105 converter receives 0~20mA or 4~20mA analog signal (4 channels) and converts into fieldbus signal. NCS-FI105 converter uses digital communication technology, and makes the interface between field device and controller easier, and reduces the expense of installation and maintenance.

4-20ma Profibus Converter Conversion Device Converter
NCS-FI105 fieldbus to current Converter is used to convert fieldbus signals to conventional analog signals. It can receive fieldbus signals, and convert them to 4-channel 4~20mA analog signals. NCS-FI105 is the converter between fieldbus system and control valve/other actuator.

NCS-TT108F/P temperature transmitter
1.Dual channel 4 types of thermal resistance and 8 types of thermocouple
2.Thermal resistance supports 2-wire and 3-wire
3.Cold junction compensation accuracy of voltage signal can reach ±1.0℃
4.High precision ( grade 0.1), low temperature drift ( ±50ppm/℃)
5. FF: FCG (FF ITK6) interoperability test, intrinsically safe, explosion-proof certification
6. PA: conform to PROFIBUS PA version 3.02

NCS-PT105II series pressure transmitter with capacitance sensor is available on FF H1, PROFIBUS PA and HART protocols. The transmitter has higher accuracy, better reliability and supports explosion proof.
1. Support the latest versions of FF H1, PROFIBUS PA and HART protocols
2. Pressure types include gauge pressure, absolute pressure, micro differential pressure, differential pressure and high static pressure
3. High precision: ±0.075% SPAN
4. Long term stability: ±0.1% URL within 12 months
5. FCG FF interoperability test certification, PNO interoperability test certification (PA profile 3.02), and FCG HART interoperability test certification (HART 7)
6. Explosion-proof (intrinsically safe, flameproof) certification

NCS-TT106 temperature transmitter supports FF H1(Foundation Fieldbus) HART and Profibus PA protocoIs and multiple temperature sensors. With independent R&D communication controller, it has become a fieldbus temperature transmitter with high performance.
1. Support 4 types of thermal resistance and 8 types of thermocouple
2. Thermal resistance supports 2-wire, 3-wire and 4-wire
3. The cold junction compensation accuracy of thermocouple can reach ±0.15 ℃
4. High precision (better than grade 0.1), low temperature drift (better than ±50ppm/℃ )
5. FCG interoperability test certification (ITK 6) and PNO interoperability test certification (PA profile 3.02), comply with HART 7
6. CE, explosion-proof (intrinsically safe, flameproof) certification

NCS-TT106 smart temperature module, using the fieldbus technology, is a new generation of smart fieldbus temperature transmitter and it is an indispensable field device for process control. NCS-TT106 transmitter integrates abundant function blocks and realizes not only general measurement function but also complicated control strategy.
1. Support the latest versions of FF H1, PROFIBUS PA and HART protocols
2. Support 6 types of thermal resistance and 8 types of thermocouple
3. Support 2-channel sensor input
4. Thermal resistance supports 2-wire, 3-wire and 4-wire
5. The cold end compensation accuracy of thermocouple is ±0.5 ℃
6. High precision (better than grade 0.1), low temperature drift (better than ±50ppm/℃ )
7. Comply with FCG interoperability specification (ITK 6 and HART 7), PNO interoperability test certification (PA profile 3.02)
8. Explosion-proof (intrinsically safe, flameproof) certification

As a conversion device, NCS-IF105 converter can receive 4-20 mA anolog signal of 4 channels and convert to FF H1 or PROFIBUS PA signal.
1. Converter for traditional analog signal to converting fieldbus signal
2. Support 4-channel 4-20 mA analog current output
3. High precision (better than grade 0.1), low temperature drift (±50ppm/℃ )
4. It can pass the interoperability test of PNO's PROFIBUS PA protocol
5. FCG interoperability test certification

NCS-TT105 temperature transmitter is a new generation of smart transmitter with FF Hl, PROFIBUS PA or HART technology. NCS-TT105 transmitter integrates abundant function blocks and realizes not only normal measurement function but also complicated control strategy.