Built-in Modules
Built-in Modules 1.Transmitter accuracy achieves 0.05% 2.Support many types of thermal resistance and thermocouple sensors 3.Thermocouple can use cold end compensation function 4.Support 2/3/4-wire RTD connection mode 5.Safety isolation for bus and sensor
-
Hot
MODBUS To PA Module
M0307 MODBUS To PA Module.M0307 Modbus to PA embedded module is one of the Microcyber M-series embedded modules developed by Microcyber Corporation.
Email Details -
Hot
MODBUS To FF Module
M0313 MODBUS To FF Module.Modbus-FF built-in module realizes the conversion function from MODBUS Protocol to Foundation Fieldbus F1 Protocol.
MODBUS To FF Module Modbus-RTU device to FF device variable output MODBUS Protocol to Foundation Fieldbus F1Email Details -
Hot
HART Module Modbus to HART Module
Microcyber Corporation (hereinafter referred to as “Microcyber”) has customized many built-in
Email Details
protocol converting modules for the majority of field device manufacturers, supporting to connect MODBUS RTU protocol (hereinafter referred to as “MODBUS” protocol) slave device into a variety of fieldbus system. The function of M0310 built-in MODBUS to HART module (hereinafter referred to as "HART module") is to convert MODBUS slave device into HART slave device. -
Hot
Modbus to DP Built-in Module
Modbus to DP Built-in Module is one of the Microcyber M-series embedded modules developed by Microcyber Corporation. This series of embedded modules have features like same size, same interface, easy to upgrade, easy configuration and so on, it is the ideal choice for users to quickly develop the fieldbus equipment.
Email Details -
Hot
Modbus to PA Built-in Module
Modbus to PA built-in module is one of the Microcyber M-series built-in modules developed by Microcyber Corporation. This series of built-in modules have features like same size, same interface, easy to upgrade, easy configuration and so on, and Modbus to PA built-in module is the ideal choice for users to quickly develop the fieldbus equipment.
Email Details -
Hot
Modbus to FF Built-in Module
Modbus to FF Built-in Module realizes the conversion function from MODBUS Protocol to Foundation Fieldbus F1 Protocol. Modbus to FF Built-in Module is one of the Microcyber M-serise modules,which have features of same size,same interface,easy to upgrade and easy to configure
Email Details -
Hot
MODBUS To DP Module
G0306 Modbus to DP Gateway
Email Details
Modbus - RTU protocol to DP protocol
Standard DP interface,baud rate self-adapting,support up to 12Mbps
Support up to 244 byte input/output
Configure Modbus relevant parameters by GSD
Modbus side can be both master and slave station -
Hot
MODBUS To HART Module
MODBUS To HART Module/M0310 General Instroduction
Email Details
Microcyber Corporation has customized many built-in protocol converting modules for the majority of field device manufacturers, supporting to connect MODBUS RTU protocol (hereinafter referred to as “MODBUS” protocol) slave device into a variety of fieldbus system. The function of M0310 built-in MODBUS to HART module (hereinafter referred to as "HART module") is to convert MODBUS slave device into HART slave device.