Built-in Modules

MODBUS To HART Module/M0310 General Instroduction
Microcyber Corporation has customized many built-in protocol converting modules for the majority of field device manufacturers, supporting to connect MODBUS RTU protocol (hereinafter referred to as “MODBUS” protocol) slave device into a variety of fieldbus system. The function of M0310 built-in MODBUS to HART module (hereinafter referred to as "HART module") is to convert MODBUS slave device into HART slave device.
1. Comply with HART 7.9 protocol standard
2. Support dynamic configuration of Modbus communication parameters
3. Support 6 device variables and 4 dynamic variables

The MC0310 is an OEM built-in module for converting Modbus RTU based instruments to HART. The MC0310 is one of the Microcyber MC series embedded core modules. This series of embedded core modules features the characteristics of same size, same interface, easy upgrade, and simple configuration. It can be widely used in various products such as transmitters, intelligent measuring equipment, instruments, and is an ideal choice for users to quickly develop fieldbus devices.
1. Comply with HART 7.9 protocol standard
2. Support dynamic configuration of Modbus communication parameters
3. Support 6 device variables and 4 dynamic variables

The M0310-ACT is an OEM actuator built-in module for converting Modbus RTU based instruments to HART. The M0310-ACT is one of the Microcyber M series embedded modules. This series of embedded modules features the characteristics of same size, same interface, easy upgrade, and simple configuration. It can be widely used in various products such as actuators and valve positioners, and is an ideal choice for users to quickly develop fieldbus devices.
1. Comply with HART 7.9 protocol standard
2. Support dynamic configuration of Modbus communication parameters
3. Support 6 device variables, 1 actuator variable, and 4 dynamic variables

The M0307 is an OEM built-in module for converting Modbus RTU based instruments to PROFIBUS PA. The M0307 is one of the Microcyber M series embedded modules. This series of embedded modules features the characteristics of same size, same interface, easy upgrade, and simple configuration. It can be widely used in various products such as transmitters, intelligent measuring equipment, instruments, and is an ideal choice for users to quickly develop fieldbus devices.
1. Size: 42mm*65mm
2. Comply with PA profile 3.02
3. Support Modbus-RTU communication parameters dynamic configuration
4. Support AI, AO, DI and DO function blocks
5. Support up to 4 channels AI, AO, DI, DO

M0313 MODBUS To FF Module.Modbus-FF built-in module realizes the conversion function from MODBUS Protocol to Foundation Fieldbus F1 Protocol.
1. Size: 42mm*65mm
2. Comply with FF H1 protocol
3. Support Modbus-RTU communication parameters dynamic configuration
4. Support AI, AO, DI, DO and PID function blocks
5. Support ITK 6

Microcyber Corporation (hereinafter referred to as “Microcyber”) has customized many built-in protocol converting modules for the majority of field device manufacturers, supporting to connect MODBUS RTU protocol (hereinafter referred to as “MODBUS” protocol) slave device into a variety of fieldbus system. The function of M0310 built-in MODBUS to HART module (hereinafter referred to as "HART module") is to convert MODBUS slave device into HART slave device.

Modbus to DP Built-in Module is one of the Microcyber M-series embedded modules developed by Microcyber Corporation. This series of embedded modules have features like same size, same interface, easy to upgrade, easy configuration and so on, it is the ideal choice for users to quickly develop the fieldbus equipment.
1. Comply with PROFIBUS DPv0 protocol standard
2. DP slave address can be set via DIP switch
3. Same hardware, M0006 custom protocol to DP module can be selected.

Modbus to PA built-in module is one of the Microcyber M-series built-in modules developed by Microcyber Corporation. This series of built-in modules have features like same size, same interface, easy to upgrade, easy configuration and so on, and Modbus to PA built-in module is the ideal choice for users to quickly develop the fieldbus equipment.
1. Size: 42mm*65mm
2. Comply with PA profile 3.02
3. Support Modbus-RTU communication parameters dynamic configuration
4. Support AI, AO, DI and DO function blocks
5. Support up to 4 channels AI, AO, DI, DO

Modbus to FF Built-in Module realizes the conversion function from MODBUS Protocol to Foundation Fieldbus F1 Protocol. Modbus to FF Built-in Module is one of the Microcyber M-serise modules,which have features of same size,same interface,easy to upgrade and easy to configure