WirelessHART Adapter
- Microcyber
- China
- In Stock
- 500 Sets/Month
A1110 WirelessHART adapter enables wireless capabilities for any HART or 4-20 mA device, providing new measurement points and access to additional data. Capable of retrofitting onto any existing 2-wire, 3-wire, or 4-wire HART device for application flexibility. No additional power or battery requirements allows for an installation-ready solution.
1. Complies with the Foundation Fieldbus H1 physical layer specification FF-830;
2. Complies with PROFIBUS PA physical layer specification TC1-09-0004.
A1110 WirelessHART Adapter Product Overview
A1110 WirelessHART adapter connects HART device to WirelessHART, supporting loop, external power and battery. Using Microcyber WirelessHART technology to transmit additional HART information such as process and diagnostics data to host system is reliable, secure, flexible and smart.
A1110 WirelessHART adapter (hereinafter referred to as A1110) is in line with the latest version of HART7.6 specification. It can seamlessly integrate the original HART equipment into WirelessHART network and protect the original assets. A1110 provides a variety of power supply modes, such as 4-20mA, external power supply, battery power supply and so on. A1110 makes all HART device data read access at any location possible, meanwhile it supports remote configuration and maintenance.
A1110 WirelessHART Adapter Features
Comply with HART7.6 standard
Support 4-20mA loop power, DC power and battery
Support HART5, 6, 7 devices
Support 2-wire, 3-wire or 4-wire HART devices
Connect up to 4 HART devices
Wireless data reliability is higher than 99.9%
A1110 WirelessHART Adapter Details
A1110 WirelessHART Adapter Install
A1110 WirelessHART Adapter Parameters
System | |
Platform | WirelessHART network |
Support the number of sub-devices | 4 |
Support sub-device type | 2,3 or 4-wire HART device |
Conforms to HART protocol version | HART7.6 |
Support sub device HART protocol version | HART5、6、7 |
Install interface | 1/2 NPT |
RF | |
Fequency band | 2.4GHz...2.48GHz |
Number of channels | 15 |
Raw data rate | 250kbps |
Output Power | 10dBm |
Receiver sensitivity | -90 dBm |
Transmission distance | Outdoor 200 meters, indoor 50 meters |
Antenna | Integrated Omni-directional antenna |
Upload data cycle | 1 s- 60 min |
Working conditions | |
Power supply | 4-20mA loop power, external DC power |
External power supply voltage | 24VDC (11-30), overload protection (55VDC) |
Circuit voltage drop | 2.5V |
Operating temperature | -40°C - 85°C |
Operating humidity | 0-100% |
Storage temperature | -40°C - 85°C |
Standards compliant | |
International protection | IP67 |
A1110 WirelessHART Adapter Ordering Information
★ Standard products represent the most common options, if you choose non-standard products, need to be ordered separately.The delivery lead time for using extended products needs to be agreed separately.
Model | Product description | |
A1110 | Wireless adapter | |
Output | ||
W | Wireless | |
Power input | ||
Standard | Standard | |
A | Circuit to take power, external power supply | ★ |
Install the connector | ||
Standard | Standard | |
1 | -14 NPT | ★ |
Wireless update rate, operating frequency and protocol | ||
Standard | Standard | |
A3 | The update rate can be configured by the user，2.4GHz DSSS，WirelessHART | ★ |
Antenna | ||
Standard | Standard | |
A9 | Omni-directional antenna | ★ |
Typical model：A1110 W A 1 A3 A9 | ||
A1110 WirelessHART Adapter Size
A1110 WirelessHART Adapter Packaging&Shipping
