Head Mounted Temperature Transmitter
- Microcyber
- Shenyang,China
- In Stock
- 500 Sets/Month
NCS-TT106 temperature transmitter supports FF H1, PROFIBUS PA and HART protocols and multiple temperature sensors. With independent R&D communication controller, it has become a fieldbus temperature transmitter with high performance.
1. Support 4 types of thermal resistance and 8 types of thermocouple
2. Thermal resistance supports 2-wire, 3-wire and 4-wire
3. The cold junction compensation accuracy of thermocouple can reach ±0.15 ℃
4. High precision (better than grade 0.1), low temperature drift (better than ±50ppm/℃ )
5. FCG interoperability test certification (ITK 6) and PNO interoperability test certification (PA profile 3.02), comply with HART 7
6. CE, explosion-proof (intrinsically safe, flameproof) certification
Head Mounted Temperature Transmitter Product Overview:
NCS-TT106H-V2.0 fieldbus temperature transmitter, using thefieldbus technology, is a new generation of smart fieldbustemperature transmitter and it is an indispensable field device forprocess control.
NCS-TT106H-V2.0 integrates abundant functionblocks and realizes not only general measurement function but alsocomplicated control strategy.
NCS-TT106H-V2.0 uses digital technology, so it can connect withmany types of thermocouple and thermo resistive sensors. It haswide range and simple interface between field and control room, which reduces the expense of installation, operation andmaintenance.
NCS-TT106H-V2.0 fieldbus temperature transmitter supportsHART, FF, and PA protocols. It can be widely used in the petroleum, chemicals, electricity, and metallurgical industries, etc.
NCS-TT106 temperature transmitter support FF H1,PROFIBUS PA and HART protocols and multiple temperature sensors.With independent R&D communication controller,it has become a fieldbus temperature transmitter with high performance.NCS-TT106 uses digital technology, so it can connect with many types of thermocouple and thermo resistive sensors. It has wide range and simple interface between field and control room, which reduces the expense of installation, operation and maintenance.NCS-TT106 supports HART, FF, and PA protocols. It can be widely used in the petroleum, chemicals, electricity, and metallurgical industries, etc.
Head Mounted Temperature Transmitter Features:
1. Supports measurement of various thermal resistances, thermocouples, and resistance and voltage signals, and converts sensor signals into 4-20mA output signals and HART signals.
2. Single-channel input, supports 2, 3, and 4-wire connection for resistance thermometers.
3. PT100 accuracy at room temperature: ±0.1℃ (digital), analog output accuracy: 0.03% * range.
4. Thermocouple cold junction compensation accuracy: ±0.15℃ (external Pt100).
5. Supports open-circuit/short-circuit detection, which can assist in detecting sensor faults.
6. Complies with intrinsic safety explosion-proof requirements and can work safely in hazardous areas.
7. Certified by CE-EMC, PAC, EAC, and other international certifications.
8. Certified by the HART Foundation.
9. Provides EDD/FDI/DTM device description files, compatible with various DCS systems.
Head Mounted Temperature Transmitter Details:
Head Mounted Temperature Transmitter Parameters:
Parameter | Value |
Input Signal | Resistance: PT100, CU50, CU100, 0~500Ω, 0~4000Ω |
Thermocouple: B, E, J, N, K, R, S, T | |
Voltage signal: -100mV~100mV | |
Channel | Single |
RTD Wiring | 2-wire, 3-wire, 4-wire |
Bus Power | 9~32 VDC Current consumption (static): ≤14mA |
Bus Signal | Communication ratio 31.25Kbit/s, current mode |
Isolation | Between terminal and housing: 500 Vrms (707 VDC) |
Working Temperature | -40℃~85℃ |
Humidity Range | 10%~90%RH |
Start Time | ≤5s |
Refresh Time | 0.5s |
EMC | GB/T 18268-2000 |
Protection | IP20 |
Head Mounted Temperature Transmitter Size:
Head Mounted Temperature Transmitter Packaging&Shipping:
