Pressure High Current Buck Converter Current to Fieldbus/4-20ma Converter NCS-IF105
- Microcyber
- Shenyang,China
- In Stock
- 500 Sets/Month
NCS-FI105F/P Fieldbus To Current Converter:
1. Converter of fieldbus signal to traditional analog signal
2. Supports four (4 to 20mA) analog current outputs
3. Pass the FCG FF H1 interoperation test
4. Pass the PROFIBUS PA interoperation test of PNO
5. High precision (±0.05% at normal temperature), low temperature bleaching (±50ppm/℃)
NCS-FI105F/P Fieldbus To Current Converter Product overview
NCS-FI105 fieldbus to current Converter is used to convert fieldbus signals to conventional analog signals. It can receive fieldbus signals, and convert them to 4-channel 4~20mA analog signals. NCS-FI105 is the converter between fieldbus system and control valve/other actuator. NCS-FI105 is an intelligent instrument and complies with FF Fieldbus Specification. It can be interlinked with several FF equipment.
NCS-FI105 is an intelligent instrument and complies with FF Fieldbus Specification. It can be interlinked with several FF equipment. Abundant function blocks are integrated into NCS-FI105, and so it can complete not only the general measuring but also the complex controlling strategy. According to the requirement and actual application environment, the users can choose different function blocks to implement different function.
NCS-FI105 utilizes digital technology, which simplifies the interface between the control center and the field equipment. And so the expense of installing, running and maintenance can be reduced.
NCS-FI105F/P Fieldbus To Current Converter:
1. Converter of fieldbus signal to traditional analog signal
2. Supports four (4 to 20mA) analog current outputs
3. Pass the FCG FF H1 interoperation test
4. Pass the PROFIBUS PA interoperation test of PNO
5. High precision (±0.05% at normal temperature), low temperature bleaching (±50ppm/℃)
NCS-FI105F/P Fieldbus To Current Converter Features
Number of channels:4
Output of signal:4-20mA
Bus signal:31.25kbit/s
Power:9-32VDC
Current consumption(static):≤ 14mA
NCS-FI105F/P Fieldbus To Current Converter Details
NCS-FI105F/P Fieldbus To Current Converter Parameters
Parameter | Value |
Input signal | 4～20mA |
Channels | 4 Channels |
Current output | NPN collector output |
Power supply | 9 ～ 32 VDC ;Current Dissipation (static): ≤ 14mA |
Fieldbus Signal | Communication Baudrate 31.25kbit/s, current-mode |
Insulation | Between housing and terminal board: |
500 Vrms (707 VDC) | |
Display | 6 bits digital number and 5 bits characters LCD display (Optional) |
Temperature range | - 40 ～ 85℃ （No display） |
- 30 ～ 70℃ （display） | |
Humidity Range | 0% ～ 100% RH |
Start Time | ≤ 5s |
Protection grade | IP 65 |
EMC | Designed to comply IEC 61000 |
NCS-FI105F/P Fieldbus To Current Converter Size
NCS-FI105F/P Fieldbus To Current Converter Wiring
The power and signal of NCS-FI105 converter Transmitter are sharing one pair of cables (Bus Cable). NCS- FI105 converter is suggested to use specific Fieldbus cables recommended by the IEC61158-2. The wiring terminal is at the rear cover side, the wiring terminal board could be seen when the rear cover is screwed.
CertificationPackaging&Shipping
