MODBUS To DP Gateway

G0306 MODBUS To DP Gateway Brief Instruction：

This gateway realizes the conversion function from Modbus RTU to PROFIBUS DP, making multiple slave station devices that conform to Modbus RTU communication regulation access to PROFIBUS DP network. 

Product name: Modbus to DP gateway

Product number：G0306

This gateway realizes the conversion function from Modbus RTU to PROFIBUS DP. Multiple slave devices that comply with the Modbus RTU communication rules can be connected to the PROFIBUS DP network. The Modbus

end can be used as a master station or as a slave station. This function can be switched by special function keys.

G0306 MODBUS To DP Gateway Size：

G0306 MODBUS To DP Gateway Working Principle：

G0306 Modbus to DP Gateway supports both Modbus RTU and PROFIBUS DP. As PROFIBUS DP slave device, itcan connect at most 31 Modbus slave station into PROFIBUS PA network theoretically （ it should be 485 bus environment, and we suggest less than 10 Modbus slave device to ensure communication quality）.

G0306 MODBUS To DP Gateway Features：

• Support 31 Modbus RTU slave devices at most

• Be tallied with PROFIBUS-DP/V0 protocol stipulations

• Support 244 input, 244 output, 244 parameters at most

• Modbus RTU and PROFIBUS DP configured flexibly by GSD files

• Transparent data transfer of Modbus RTU and PROFIBUS DP

• PROFIBUS DP address set up by hardware

• 35mm rail, easy to install

• Frequency converter, motor start protection device, transmitters, intelligent measuring device and instrument, etc. with MODBUS protocol interface

G0306 MODBUS To DP Gateway Details：

Equipment classification：

This gateway is divided into two models according to the Modbus interface (consistent with the actual selection)：

This gateway is distinguished according to the communication method (function distinction, use the following name to facilitate document description, not the actual selection, see the appendix for the actual selection)： 

 Note： 1) The V1.0 version only implements the GW-MODB-DP-RS485 version, and the GW-MODB-DP-RS232http://www.microcyber.cn/en ~ 2 ~ version will be added later, so stay tuned. 

             2) G0306 Modbus to DP gateway can switch freely between G0306-MS and G0306-SS through special function buttons according to user needs, see 2.2.7 for the switching method.

G0306 MODBUS To DP Gateway Basic Parameter：

G0306 MODBUS To DP Gateway Application：

G0306 MODBUS To DP Gateway Package and Delivery：