G1013 HART To FF Gateway
- Microcyber
- Liaoning, China
- ASAP
- 1000 units per month
The G1013 is a DIN-rail-mounted gateway that converts between HART and Foundation Fieldbus (FF) protocols. As one of the Microcyber G-series protocol conversion gateways, it can seamlessly integrate existing HART devices into FF bus networks.
1. HART protocol to FF H1 protocol
2. Support HART 7 protocol and backward compatible
3. Support up to 4 HART slave devices
4. Support 4 AI and 1 PID function block
G1013 HART To FF Gateway Brief instruction:
G1013 HART to FF Gateway, designed by Microcyber Corporation is a gateway device for HART protocol and FF protocol. As HART master, G1013 HART to FF Gateway communicates with HART slave via HART interface, it can convert dynamic variables in the device to FF device variables output.
G1013 HART To FF Gateway Working Principle:
HART to FF gateway is a converter for HART protocol to FF protocol. As a HART master device, it can connect HART bus device in single-point mode or multiple-point mode. It can connect 4 HART devices. As a FF slave device, the gateway can convert HART device dynamic data to FF function block channel data, and transfer to control system via function block output.
G1013 HART To FF Gateway Features:
1. HART protocol converted to FF protocol, supporting up to 4 HART slave devices.
2. Support HART 7 protocol and is backward compatible.
3. Support 4 AI function modules and 1 PID function module.
4. Support ITK 6.5.0, supports function block diagnostics, and supports Link Master functionality.
G1013 HART To FF Gateway Size:
G1013 HART To FF Gateway Structure:
G1013 HART to FF Gateway shown ：
G1013 HART to FF Gateway is powered by FF bus, and the HART part shall be with 24V external powered. The recommended is TP cable, and it shall improve device’s anti-electromagnetic interference ability.
G1013 HART To FF Gateway Basic Parameter:
| Measurement Object | HART slave device |
| HART Power | 24VDC |
| FF Bus Power | 9~32VDC |
| Bus Protocol | 2-wire, FF Protocol |
| Isolation Voltage | HART and FF bus interface, 500VAC |
| Temperature Range | -40℃~85℃ |
| Humility Range | 5~95%RH |
| Start Time | ≤5s |
| Refresh Time | 0.2s |
G1013 HART To FF Gateway Working Principle:
HART to FF gateway is a converter for HART protocol to FF protocol. As a HART master device,it can connect HART bus device in single-point mode or multiple-point mode. It can connect 4 HART devices. As a FF slave device, the gateway can convert HART device dynamic date to FF function block channel data, and transfer to control system via function block output.
HART to FF gateway consists of two boards, one is FF communication board and the other one is HART interface board. FF communication board is a universal board and it can be used in different devices, for FF bus communication. HART interface board is only used in G1013, for signal isolation, signal convert, FF/PA communication module power, and HART device power, etc. The working principle for G1013 is shown
FF device supports multiple network topology connections, shown as the FF devicebus connection is shown in Figure 4.2, the bus ends is connected with terminal matched resistance to ensure signal quality. The maximum length is1900m, it shall be prolonged to 10km with repeaters.
G1013 HART To FF Gateway Application:
G1013 HART To FF Gateway Package and Delivery:
