Diffused Silicon Pressure Transmitter/NCS-PT105IIS Pressure Transmitter
- Microcyber
- Shenyang,China
- In Stock
- 500 Sets/Month
NCS-PT105IIS series pressure transmitter with advanced, mature, reliable piezoresistance silicon sensor has been designed meticulously by combining advanced microprocessor technology and analog measurement techniques, and it is available on FF H1, PROFIBUS PA, PROFIBUS DP and HART protocols.
NCS-PT105IIS Pressure Transmitter:
1. Support the latest versions of FF H1, PROFIBUS PA, PROFIBUS DP and HART protocols
2. Pressure types include gauge pressure, absolute pressure
3. High precision: ±0.075% SPAN
4. Long term stability: ±0.1% URL within 12 months
5. FF, PA, HART interoperability test, intrinsically safe, explosion-proof, flameproof certification
NCS-PT105IIS Pressure Transmitter Product Overview
NCS-PT105IIS series pressure transmitter with advanced,mature,reliable piezoresistive silicon sensor has been designed meticulously by combining advanced microcprocessor technology and digital capacitance measurement technques,and it is available on FF H1,PROFIBUS PA,PROFIBUS DP and HART protocols.It can be widely used in the petroleum, chemicals, electricity, and metallurgical industries, etc.
NCS-PT105IIS Pressure Transmitter Features:
NCS-PT105IIS Pressure Transmitter:
Support the latest versions of FF H1, PROFIBUS PA, PROFIBUS DP and HART protocols
Pressure types include gauge pressure, absolute pressure
High precision: ±0.075% SPAN
Long term stability: ±0.1% URL within 12 months
FF, PA, HART interoperability test, intrinsically safe, explosion-proof, flameproof certification
NCS-PT105IIS Pressure Transmitter Type Selection：
Model | Type |
NCS-PT105ⅡS SG | Gauge pressure transmitter |
NCS-PT105ⅡS SA | Absolute pressure transmitter |
NCS-PT105II series intelligent pressure transmitters are divided into four types according to the type of bus protocol：
As a transitional protocol in the field bus, the HART protocol realizes digital transmission on the existing analog signal transmission line and is compatible with the existing analog signal control system; FF H1 and PROFIBUS PA are used in the control field and connect field devices. The new generation of digital communication protocol, the physical layer specification adopts the international standard of IEC61158-2. FF H1, PROFIBUS PA and PROFIBUS DP are real fieldbuses.
Intelligent transmitter based on HART protocol, hereinafter referred to as HART intelligent transmitter; intelligent transmitter based on FF H1 protocol, hereinafter referred to as FF intelligent transmitter; intelligent transmitter based on PROFIBUS PA protocol, hereinafter referred to as PA intelligent transmitter; intelligent transmitter based on PROFIBUS DP protocol, hereinafter referred to as DP intelligent transmitter; transmitters of the four bus types are collectively referred to as intelligent pressure transmitter, hereinafter referred to as intelligent transmitter.
NCS-PT105IIS Intelligent pressure transmitter
Electrical connection | 1/2-14 NPT female thread |
Process connection | 1/4-18 NPT female thread |
Structural materials | Isolated Membrane and exhaust/outlet valve：316 stainless steel, Hastelloy C, Monel or tantalum; Bleed/drain valve: 304 stainless steel, 316 stainless steel; Flange and connector: 304 stainless steel, 316 stainless steel; O-ring: Nitrile rubber, fluorine rubber; Filled liquid: silicon oil or fluorocarbon oil; Bolt：zinc plating carbon steel; (The material above should be selected at order, if has other requirement, please report in advance) Housing: low copper aluminum alloy; Coating: Polyester epoxy resin. |
NCS-PT105IIS Pressure Transmitter Parameters：
Parameter | Value |
Measure object | liquid、gas、stream |
Power | 9～32V dc（FF、PA） |
9～17.5VDC（FF、PA; explosion-proof） | |
11.9～42VDC（HART） | |
11.9～30VDC（HART; explosion-proof） | |
Output | Analog：2 wire 4～20mA |
Digital：HART，FF and PA signal | |
Load resistant | 0～1500ohm（common） |
250～550ohm（use HART） | |
Insulation | Voltage between terminal and housing：500Vrms（707VDC） |
Display | Optional 6 bits digital number or 5 bits characters LCD display |
Humidity scale | 5%～100%RH |
Start time | ≤ 5 seconds |
Dump adjusting | Constant of time 0～15 seconds |
NCS-PT105IIS series pressure transmitter Size：
NCS-PT105IIS Pressure Transmitter Certification：
NCS-PT105IIS Pressure Transmitter Application：
