Current to Fieldbus Converter Model: NCS-IF105 Brief Introduction

Automation Expo 2019 is on 25th - 28th September 2019, at BCEC, Goregaon (East), Mumbai. Microcyber Corporation will participate Automation Expo 2019!

The 15th Anniversary Sharing Meeting of Microcyber

M0313 and MC0313 are one-to-one industrial-grade protocol conversion modules with a dual communication identity: On the Modbus side: They act as a master station, collecting data from Modbus devices via a TTL interface. On the FF side: They act as a slave station, mapping the collected data to the parameters of the M0313 and MC0313 conversion blocks. Through the channel acces functions of the conversion blocks to AI, AO, DI, and DO function blocks,they provide data support for the FF system.

The MC0307 is an OEM built-in module for converting Modbus RTU based instruments to PROFIBUS PA. The MC0307 is one of the Microcyber MC series embedded core modules. This series of embedded core modules features the characteristics of same size, same interface, easy upgrade, and simple configuration. It can be widely used in various products such as transmitters, intelligent measuring equipment, instruments, and is an ideal choice for users to quickly develop fieldbus devices.

The M0310-ACT is Microcyber M-series built-in module, specifically designed for HART communication in electric actuators . Its core function is to build a bidirectional translation bridge between Modbus actuators and HART masters. It features a modular design, making it easy to integrate and deploy.

Microcyber mainly provides Pressure Transmitter, Temperature Transmitter, Communication PCB, Communication Chip, Signal Converter, Control System and accessories with FF, PA and HART protocols for industrial process control solution.Our NCS-PT105 pressure transmitter (FF) and NCS-FI105 fieldbus to current converter (FF) have passed integration test with ABB control system.

Microcyber, founded in 2003, has consistently driven breakthroughs in industrial connectivity technology through innovation. The company is not only a national "Specialized, Refined, Unique, and Innovative" enterprise for specialized, sophisticated, and innovative technologies, and a member of the China Instrument Industry Association, but also oversees the construction and operation of the National and Local Joint Engineering Research Center for Networked Control Systems, making it a highly trusted partner in the domestic industrial sector.

Phenomenal expression The starting drift of a pressure transmitter refers to the phenomenon that its output signal deviates from the initial set value during the equipment startup phase. This deviation is usually more obvious in a short period of time after startup, and may appear as a rapid rise or fall in the output value, and then gradually stabilize. For example, in some petrochemical plants, when the pressure transmitter is started, its output value may fluctuate greatly within a few minutes, which is far from the actual pressure value.

The pressure transmitters of Microcyber have already obtained the explosion-proof and intrinsically safe way of explosion-proof certification, of which the explosion-proof certification has taken the Ex d IIC T4/T6 Gb certification requirements, and can be widely used in a variety of industrial sites as well as the explosion-proof requirements of the occasion.