fieldbus
-
Hot
Fieldbus Distributor
Active Fieldbus Distributor is suitable for the FF H1 and PROFIBUS PA fieldbus application. Through the distributor, field devices use the topology of the main - branch to connect the system. Each distributor has four branches. There's built-in automatic bus terminal. LED status indicator can rapidly diagnosis main line and branch line short circuit state, isolate the fault section automatically. Multiple protection function of the distributor can ensure the safe operation of the system. The MCAFD8 active fieldbus distributor is suitable for FF-H1 and PROFIBUS PA fieldbus should be used to connect field equipment to the system in a main-branch topology through the distributor, each of which has eight branches, built-in automatic bus terminal, LED status the indicator can quickly diagnose the short circuit status of the main line and secondary line, automatically isolate the fault section, and ensure the safe operation of the system with multiple protection functions of the distributor.
Email Details -
Tank Car Safety Monitoring System
This is a classic case to help customers complete tank car safety monitoring system, customers are very satisfied, we will carry out long-term cooperation.
Email Details -
WirelessHART Adapter Industrial Wireless Solutions
A1110 WirelessHART Adapter (hereinafter referred to as A1110) is in line with the latest version of HART7.6 specification.
Email Details
-
0502-2024
Performance Features and Design of HT1200M
The HART protocol superimposes audio digital signals on 4~20 mA analog signals. The digital signal amplitude is 0.5 mA and the data rate reaches 1200 b/s. 1200 Hz represents logic "1" and 2200 Hz represents logic "0". Enables two-way digital communication. HART communication has the characteristics of simultaneous point-to-point 4 ~ 20 mA analog and digital communication, multi-station communication methods, and multiple transmissions.The HT1200M is compatible with the SYM20C15 and HT20C15 and with ON OnSemi's A5191HRT and HT2015.
-
1708-2022
NCS-IF105 converter Quadruple Channel Current 4-20mA to Fieldbus Converters/Current to Fieldbus Converter
NCS-IF105 converter Quadruple Channel Current 4-20mA to Fieldbus Converters As intelligent transition device, NCS-IF105 converter receives 0~20mA or 4~20mA analog signal (4 channels) and converts into fieldbus signal. NCS-FI105 converter uses digital communication technology, and makes the interface between field device and controller easier, and reduces the expense of installation and maintenance.
