Communication Chip

HT1200M HART Communication Chip

FBC0409 FF Communication Chip
FBC0409 is a fieldbus interface and controller IC which conforms to IEC 61158 filedbus physical layer definition. It supports typical embedded CPU and MCU, and satisfies the demands of high performance fieldbus masters or slavers.

APC3 General Introduction
APC3 is an ASICs chip for PROFIBUS DP intelligent slave development.

FF PA Communication Controller is a fieldbus interface and controller IC which conforms to IEC 61158 filedbus physical layer definition. It supports typical embedded CPU and MCU, and satisfies the demands of high performance fieldbus masters or slavers.

HART Communication Controller is a single-chip, CMOS modem for use in Highway Addressable Remote Transducer (HART) field instruments and masters. The modem and a few external passive components provide all of the functions needed to satisfy HART physical layer requirements including modulation, demodulation, receive filtering, carrier detect and transmit-signal shaping. The HT1200M is pin-compatible with the SYM20C15. See the Pin Description and Functional Description sections for details on pin compatibility with the SYM20C15.
The HT1200M uses Phase Continuous Frequency Shift Keying (FSK) at 1200 bits per second. To conserve power the receive circuits are disabled during transmit operations and vice versa. This provides the half-duplex operation used in HART communications.

DP Communication Controller APC3 is an ASICs chip for PROFIBUS DP intelligent slave station development. APC3 supports the DPV0 part of the PROFIBUS DP standard.

FBC0409 Profibus PA Communication Chip