Pressure transmitter is a device that converts pressure into pneumatic signal or electric signal for control and remote transmission.

Absolute pressure transmitter used for measurement of the liquid, steam, gas or atmospheric.

NCS-TT106H-R1 HART single channel Din Rail temperature transmitter

Temperature Transmitter

NCS-TT108F/P temperature transmitter supports 8-channel temperature sensor input. It supports FF H1 and PROFIBUS PA protocols. With wide range, it can be applied to a variety of thermal resistance and thermocouple sensors.

Overview and Features of Smart Temperature Transmitter

Causes and hazards of corrosion Oil and gas pipelines, pipelines for hazardous chemicals in refineries, storage tanks, etc. will be accompanied by corrosive substances such as sulfides, water-soluble acids, and water-soluble alkalis during use. In the process of production, processing and transportation, the production equipment and transportation pipelines are corroded. Mainly occur in low-temperature parts leak corrosion, high-temperature parts sulfur corrosion, and high-temperature parts naphthenic acid corrosion, which seriously affects the safety of the device, and even causes serious economic and social impacts; lack of long-term effective online inspection of on-site equipment and pipelines It is difficult to predict the risks of existing pipelines by using data analysis to predict the life of pipelines; the intervals between overhauls are too long, and it is difficult to measure the regular corrosion of overhead pipelines. Therefore, a device capable of online corrosion monitoring of pipelines is required.

The importance of temperature in remote sealed pressure transmitter

Pressure transmitter is a measuring instrument, mainly for pressure, liquid, gas, etc. for testing. All instruments will fail in use, and pressure transmitters are no exception. Pressure transmitters will also have problems of this kind in use, so when there are problems, how to solve them, let's introduce the 5 common problems and solutions.

Microcyber pressure transmitter manufacturers remind users to read the product sample and instruction manual carefully before installing and using the pressure transmitter, and the pressure interface must not leak during installation to ensure that the range and wiring are correct.