M0306 MODBUS To DP Module
- Microcyber
- Liaoning, China
- ASAP
- 1000 units per month
M0306 Modbus to DP Module
1. Size: 42mm*65mm
2. Modbus-RTU master station, PROFIBUS DP slave station
3. Comply with PROFIBUS DPV0 protocol
4. Electrical interface connected with Modbus-RTU slave is TTL level
5. Can set PROFIBUS DP slave station address via DIP switch
5. Same hardware, M0006 custom protocol to DP module
M0306 MODBUS To DP Module General Instruction
M0306 Modbus to DP built-in module is one of the Microcyber M-series embedded modules developed by Microcyber Corporation. This series of embedded modules have features like same size, same interface, easy to upgrade, easy configuration and so on, and it is the ideal choice for users to quickly develop the fieldbus equipment.
By embedding the M0306 into the users’ equipments with Modbus-RTU communication capabilities, the user equipment can be changed to Profibus DP slave station.User can quickly achieve Profibus DP, FF, HART & etc. equipment by replacing other modules of M series.This product has four types based on MCU power supply voltage and whether user interface 2 is available.
M0306 MODBUS To DP Module Features
Quick time to market
Users do not need to understand PROFIBUS development technology, purchase a PROFIBUS development system, or write GSD files themselves to develop PROFIBUS products with independent intellectual property rights in a short period of time.
Same size
Microcyber M-series embedded modules all have the same dimensions: 65mm (length) * 42mm (width)
Same interface
Microcyber M-series embedded modules all use 2.54mm pitch 16-pin connectors, ensuring functional compatibility.
Easy upgrade
By replacing different embedded modules in the Microcyber M series, devices with different protocols can be implemented.
Simple configuration
With the accompanying Modbus configuration tool, users can freely and flexibly set various parameters for the module as needed.
Simple application
The communication module reads and writes the MCU input/output data of the user product through the serial interface, and automatically converts it into PROFIBUS DP protocol data to communicate with the PROFIBUS master station.
Wide range of applications
It can be widely used in various products, such as frequency converters, motor starting protection devices, intelligent high and low voltage electrical appliances, power measurement devices, various transmitters, intelligent field measurement equipment and instruments, etc.
Provided via OEM
Users have independent intellectual property rights, brand and trademark registration rights for the products.
PNO pre-certified
Pre-certified with the PROFIBUS user organization for network compliance, enabling faster network certification.
M0306 MODBUS To DP Module Size：
M0306 MODBUS To DP Module Technical Details：
M0306 supports two modes of operation: configuration mode and normal operation mode, which can be switched in real-time according to the dial switch.When M0306 works in configuration mode, M0306 is used as the Modbus slave station, while the Modbus general configuration tool is used as the Modbus master station. Through the Modbus general configuration tool, besides the configuration of basic information such as manufacturer ID, device ID and device address sources, the main function is the configuration of read-write user board Modbus input and output data's Modbus command queue parameter information, such as which MODBUS function code are used by parameters to read and write,what the register address is and so on. After the configuration, the information will be downloaded to the M0306.Under normal operating mode, M0306 is master station in Modbus side, the user board is Modbus slave station.In accordance with configured parameters and mechanisms, M0306 circularly sends Modbus command queue to the user board to read and write user board Modbus input and output data. M0306 is DP slave station at the PROFIBUS terminal, conducting real-time PROFIBUS input and output data exchange with PROFIBUS master control system.
M0306 MODBUS To DP Module Specification：
Power | VCC（MCU power）：5.0V 120mA / 3.3V 100mA |
DP bus baud rate | Baud rate self- adaption：9.6K~12Mbps |
Protocol before transition | Modbus GB/Z 19582.1-2004 |
Protocol after transition | Profibus DP GB/T 20540.1~.6-2006 |
DP max input data | Max Input Bytes ≤ 244 Bytes |
DP max output data | Max Output Bytes ≤ 244 Bytes |
DP max total input and output data | Input Bytes + Output Bytes ≤ 360 Bytes |
max user data | Max User Data Bytes ≤ 200 Bytes |
Max IO configuration data | Max IO Configuration Data Bytes ≤ 20 Bytes |
Temperature range | -40℃ ~ +85℃ |
Humidity range | 5 ~ 95%RH |
Start time | ≤ 5s |
Weight | 14 g |
Dimension （L×W×H） | 65×42×14 mm |
Electromagnetic compatibility | GB/T 18268.1 |
Noise interference | EN 61131-2:2003 |
M0306 MODBUS To DP Module Application：
M0306 MODBUS To DP Module Package and Delivery：
