hart protocol
-
Hot
HART Communication Controller
HART Communication Controller is a single-chip, CMOS modem for use in Highway Addressable Remote Transducer (HART) field instruments and masters. The modem and a few external passive components provide all of the functions needed to satisfy HART physical layer requirements including modulation, demodulation, receive filtering, carrier detect and transmit-signal shaping. The HT1200M is pin-compatible with the SYM20C15. See the Pin Description and Functional Description sections for details on pin compatibility with the SYM20C15. The HT1200M uses Phase Continuous Frequency Shift Keying (FSK) at 1200 bits per second. To conserve power the receive circuits are disabled during transmit operations and vice versa. This provides the half-duplex operation used in HART communications.
Email Details
-
0502-2024
Performance Features and Design of HT1200M
The HART protocol superimposes audio digital signals on 4~20 mA analog signals. The digital signal amplitude is 0.5 mA and the data rate reaches 1200 b/s. 1200 Hz represents logic "1" and 2200 Hz represents logic "0". Enables two-way digital communication. HART communication has the characteristics of simultaneous point-to-point 4 ~ 20 mA analog and digital communication, multi-station communication methods, and multiple transmissions.The HT1200M is compatible with the SYM20C15 and HT20C15 and with ON OnSemi's A5191HRT and HT2015.
-
1004-2024
Analysis of the common faults and solutions of temperature transmitters
Temperature transmitter technology has been very mature, very common in various factories, transmitters are often used in conjunction with a number of instruments, often in the process of supporting the use of some minor failures. The more common faults and solutions are as follows.
