Fieldbus Instruments

NCS-TT106 smart temperature module, using the fieldbus technology, is a new generation of smart fieldbus temperature transmitter and it is an indispensable field device for process control. NCS-TT106 transmitter integrates abundant function blocks and realizes not only general measurement function but also complicated control strategy.
1. Support the latest versions of FF H1, PROFIBUS PA and HART protocols
2. Support 6 types of thermal resistance and 8 types of thermocouple
3. Support 2-channel sensor input
4. Thermal resistance supports 2-wire, 3-wire and 4-wire
5. The cold end compensation accuracy of thermocouple is ±0.5 ℃
6. High precision (better than grade 0.1), low temperature drift (better than ±50ppm/℃ )
7. Comply with FCG interoperability specification (ITK 6 and HART 7), PNO interoperability test certification (PA profile 3.02)
8. Explosion-proof (intrinsically safe, flameproof) certification

As a conversion device, NCS-IF105 converter can receive 4-20 mA anolog signal of 4 channels and convert to FF H1 or PROFIBUS PA signal.
1. Converter for traditional analog signal to converting fieldbus signal
2. Support 4-channel 4-20 mA analog current output
3. High precision (better than grade 0.1), low temperature drift (±50ppm/℃ )
4. It can pass the interoperability test of PNO's PROFIBUS PA protocol
5. FCG interoperability test certification

NCS-TT105 Smart Temperature Transmitter：
1. Support the latest versions of FF H1, PROFIBUS PA and HART protocols
2. Support dual-channel sensor input, support redundancy and hot backup
3. Thermal resistance supports 2-wire, 3-wire and 4-wire
4. The cold end compensation accuracy of thermocouple is ± 1.0℃
5. High precision (better than grade 0.1), low temperature drift (better than ± 50ppm/℃)
6. Enhanced type: ±0.1℃ (Pt100, Pt1000)

NCS-PT105IIS series pressure transmitter with advanced, mature, reliable piezoresistance silicon sensor has been designed meticulously by combining advanced microprocessor technology and analog measurement techniques, and it is available on FF H1, PROFIBUS PA, PROFIBUS DP and HART protocols.
NCS-PT105IIS Pressure Transmitter:
1. Support the latest versions of FF H1, PROFIBUS PA, PROFIBUS DP and HART protocols
2. Pressure types include gauge pressure, absolute pressure
3. High precision: ±0.075% SPAN
4. Long term stability: ±0.1% URL within 12 months
5. FF, PA, HART interoperability test, intrinsically safe, explosion-proof, flameproof certification

NCS-TT106-R1 fieldbus temperature transmitter, using the fieldbus technology, is a new generation of smart fieldbus temperature transmitter and it is an indispensable field device for process control.
1. Support 4 types of thermal resistance and 8 types of thermocouple
2. Thermal resistance supports 2-wire, 3-wire and 4-wire
3. The cold junction compensation accuracy of voltage signal can reach ±0.15℃
4. High precision (better than grade 0.1), low temperature drift (better than±50ppm/℃ )
5. FCG interoperability test certification (ITK 6), PNO interoperability test certifi-cation (PA profile 3.02), and FCG HART interoperability test certification (HART 7)
6. CE, explosion-proof (intrinsically safe, flameproof) certification

The NCS-TT306HR Intelligent Temperature Transmitter is a dual-channel DIN-rail mounted temperature transmitter featuring high reliability, high long-term stability, high precision, and low temperature drift. Equipped with advanced diagnostic functions and sensor redundancy hot backup, it is designed to meet the measurement requirements of critical process stages, making it an indispensable field device for process control.
1. Dual-channel RTD/TC/Ohm/mV to 4-20mA & HART
2. NE107 compliant sensor & hardware fault detection
3. Certified to SIL2/SIL3 per IEC 61508 standard

The NCS-TT306HR1 Series Intelligent Temperature Transmitter is a dual-channel DIN-rail mounted temperature transmitter featuring high reliability, high long-term stability, high precision, and low temperature drift. Equipped with advanced diagnostic functions, it is designed to meet the measurement requirements of critical process stages, making it an indispensable field device for process control.
1. Single-channel RTD/TC/Ohm/mV to 4-20mA & HART
2. NE107 compliant sensor & hardware fault detection
3. Certified to SIL2/SIL3 per IEC 61508 standard

HART Double Channel Din Rail Temperature Transmitter(NCS-T106H-R) provides a flexible and reliable solution for temperature measurement.As a high-precision transmitter, cns-tt106h-r is designed for your most demanding applications.HART communication converts different types of input signals into 4~20mA analog output signals.
1. Support 2-wire 4-20 mA+HART output
2. Support 2-channel sensor input
3. Support 4 types of thermal resistance and 8 types of thermocouple signals
4. Inputs for RTD in 2-wire, 3-wire and 4-wire
5. The cold junction compensation accuracy of voltage signal can reach ±0.15 ℃
6. High precision (better than grade 0.1), low temperature drift (better than ±50ppm/℃ )
7. Comply with HART 7

The NCS-IF105 Current to PROFIBUS PA Converter is an intelligent device that converts analog signals to Foundation Fieldbus signals. It can receive four channels of 0-20mA or 4-20mA analog signals and convert them into PROFIBUS PA signals. The NCS-IF105 acts as a converter between analog transmitters and PROFIBUS PA systems.
1. Converter for traditional analog signal to converting fieldbus signal
2. Support 4-channel 4-20 mA analog current output
3. High precision (better than grade 0.1), low temperature drift (±50ppm/℃ )
4. It can pass the interoperability test of PNO's PROFIBUS PA protocol
5. FCG interoperability test certification