Built-in Modules

The MC0313 is an OEM built-in module for converting Modbus RTU based instruments to FF. The MC0313 is one of the Microcyber MC series embedded core modules. This series of embedded core modules features the characteristics of same size, same interface, easy upgrade, and simple configuration. It can be widely used in various products such as transmitters, intelligent measuring equipment, instruments, and is an ideal choice for users to quickly develop fieldbus devices.
1. Support ITK 6.5.0, supports function block diagnostics, and supports Link Master functionality.
2. Support multiple function blocks including AI, AO, DI, DO, and PID.
3. Provide 3.3V and 6V power outputs.

The MC0312 is an OEM built-in module for converting Modbus RTU based instruments to HART-IP. The MC0312 is one of the Microcyber MC series embedded core modules. This series of embedded core modules features the characteristics of same size, same interface, easy upgrade, and simple configuration. It can be widely used in various products such as transmitters, intelligent measuring equipment, instruments, and is an ideal choice for users to quickly develop fieldbus devices.
1. Comply with HART 7.9 protocol standard, supports HART-IP protocol
2. Support Ethernet-APL two-wire Ethernet physical layer
3. Provide 3.3V and 5V power output

M0306 Modbus to DP Module
1. Size: 42mm*65mm
2. Modbus-RTU master station, PROFIBUS DP slave station
3. Comply with PROFIBUS DPV0 protocol
4. Electrical interface connected with Modbus-RTU slave is TTL level
5. Can set PROFIBUS DP slave station address via DIP switch
5. Same hardware, M0006 custom protocol to DP module

MODBUS To HART Module/M0310 General Instroduction
Microcyber Corporation has customized many built-in protocol converting modules for the majority of field device manufacturers, supporting to connect MODBUS RTU protocol (hereinafter referred to as “MODBUS” protocol) slave device into a variety of fieldbus system. The function of M0310 built-in MODBUS to HART module (hereinafter referred to as "HART module") is to convert MODBUS slave device into HART slave device.
M1100S WirelessHART Communication Module：
1. Choose low-power chips
2. Comply with HART7.5 standard
3. Pass FCG WirelessHART certification
4. Quickly integrate WirelessHART into existing equipment
5. Safe, reliable and standard data transmission