HART To MODBUS Gateway
- Microcyber
- Liaoning, China
- ASAP
- 1000 units per month
G1003
G1003 Brief Instruction
G1003 gateway realizes protocol converting from HART to Modbus RTU / ASCII. Supporting to connect multi HART slave devices into Modbus network. In the gateway, HART terminal is master station, Modbus terminal is slave station.
G1003 Features
Be tallied with HART7.0
HART master and Modbus slave mode
4~20mA analog signal overlay HART digital signal
Support 15 HART slave device
Configure gateway by special software
Write protect user data
RS485 Modbus interface
LED power and communication indicating
Standard DIN rail installation
G1003 Size
G1003 Structure
G1003 Basic Parameter
Parameter | Value |
Working Temp. | -20 ... +70 °C |
Storage Temp. | -20 ... +70 °C |
Power Supply | 9~30VDC |
Dimension (L x W x H) | 114.5 x 22.5 x 99 mm (without connector) |
Modbus Interface | RS-232/RS-422/RS485 |
HART Interface | HART digital signal |
Indicator Light | SYS, APL, L/A, Rx/Tx, bus-specific |
Weight | 150 g |
Protocol before conversion | HART |
Protocol after conversion | Modbus |
EMC | GB/T 18268.1 |
Noise Interference | GB 9254 |
Installation | DIN-Rail, EN-50022 35mm x 7,5mm |
G1003 Application
G1003 Package and Delivery
