FF PA Communication Controller

  • Sales FF PA Communication Controller, Buy FF PA Communication Controller, FF PA Communication Controller Factory, FF PA Communication Controller Brands
  • Sales FF PA Communication Controller, Buy FF PA Communication Controller, FF PA Communication Controller Factory, FF PA Communication Controller Brands
FF PA Communication Controller
  • Microcyber
  • China
  • In Stock
  • 500 Sets/Month

FF PA Communication Controller is a fieldbus interface and controller IC which conforms to IEC 61158 filedbus physical layer definition. It supports typical embedded CPU and MCU, and satisfies the demands of high performance fieldbus masters or slavers.

FF PA Communication Controller: FBC0409 contains Manchester data encoder and decoder on chip. It requires a medium interface and external filter for connection to a fieldbus system, and can automatically correct bus polarity. FBC0409 also contains 4k bytes embedded data RAM, applying DMA controller. The implementation of message transmission and address resolution can be executed without CPU intervention. The Rx and Tx data status is available in status registers of FBC0409, such as status of line operation, code error、frame loss, frame collision.

FBC0409 implement a portion of data-link layer function. Tx/Rx frame check sequence (FCS), 16 bits 1ms timer, 16 bits 1/32ms timer, 16 bits octet time timer, frame code decoding and address resolution.

 

FF PA Communication ControllerBrief Introduction

Designed to comply with IEC 61158-2

Has physical layer and some function of link layer

Good at integration, simple external circuit, small size

Available in 44-pins TQFP package

Internal 4k bytes asynchronous SRAM

storage data for transmitting, receiving

and address lookup table

Low power consumption design<600UA

Available for developing the products with FF H1PROFIBUS PA

 

FF PA Communication Controller Features

FBC0409 is designed for fieldbus physical and part data link communication functions, details list below:

 

Supports line data rate 31.25K Bit/S

Build-in Manchester Encoder/Decoder

Transmitter Jibber inhibit, receiver super long frame inhibit

Automatic parity recognize and correct

Message type and destination address detection automatically

Automatic transmitter and receiver frame check

Build-in three channels DMA controllerused to control data transmitting, receiving and address recognization looking up table memory management

4k bytes asynchronous SRAM internal as communication buffer for transmitting, receiving and address lookup table memory

Length of Preamble, Start and Stop delimiter under software controlled

Build-in bus arbiter, CPU accessing internal SRAM correctly

Data link layer timer ( 1ms1/32 msoctet time timer )

Designed lots of useful interrupt and status Registers

Compatibility with INTELARM serials CPU

Internal loop back for test

STANDBY feature

Power supply: 2.75.5V

Power consumption: <600uA

Operating temperature range: -40℃85℃

Available in 44-pins TQFP package

 

 

Designed to comply with IEC 61158-2

Supports line data rate 31.2Skbit/s

Good at integration, simple external circuit, small size

Available in 44-pin TQFP package

Low power consumption design : <600µA

 

FF PA Communication Controller Performance Characteristic

Supports line data rate 31.25K BIT/S

Build-in Manchester Encoder/Decoder

Transmitter Jibber inhibit, receiver super long frame inhibit

Automatic parity recognition and correction

Build-in two channels DMA controllerused to control data transmitting, receiving and address recognition

Build-in bus arbiter, CPU accessing internal SRAM correctly

Internal loop back for test

Operating temperature-40℃85℃

 

 

FF PA Communication Controller Typical Application

Chip FBC0409 was designed as fieldbus communication controller, following is its typical application. 

Communication Controller

FBC0409 Controller Typical Application

Communication chip

FF PA Communication Controller Pin Assignment

FBC0409 is packaged in a 44-pins TQFP package. The body size is 10mm×10mm, pins pitch is 1.8mm.

profibus rs485

FBC0409 Pin Diagram

 

 

FF PA Communication Controller FBC0409 Pin Description

Communication Controller


 

Parameters

Characteristics

 

Thermal Information

 

Storage temperature-65~150℃

Operating temperature-40~85℃

Long-term operating junction temperature-40~85℃

 

FF PA Communication Controller DC/AC Characteristics

 

FBC0409 DC_1. Characteristics

Communication chip

 

FF PA Communication Controller FBC0409 DC_2. Characteristics

profibus rs485

Cautions:

Input signal: PB_WR, PB_RD, PBI_INT_N, PB_DATA[7:0]

Input signal: SCLK, NCLK, RST_N, RX_FFD, PB_ADDR[11:0], PB_RAMCS_N and PB_REGCS_N are Schmitt.

 


FF PA Communication Controller Dimension

Package information

FBC0409 is TQFP44 package.

Communication Controller

 

FF PA Communication Controller Packages Information

Communication chip

FF PA Communication Controller FAQ


Q: Can I get a free electronic manual?

A: Yes, if you want it, please contact us.

 

Q: How many functional modules does FBC0409 FF/PA Communication Controller have?

A: CPU Interface, Register, Timer, DMA Controller, Bus Arbiter, Address Recognizing, Bus Receiver, Bus Transmitter, Clock Generator and Interrupt Function.

 

Q: Can you provided OEM service?

A: Yes, we can, such as communication board, we can also provided fieldbus development toolkit.


Hot Product--FF PA Communication Controller

profibus rs485Communication ControllerCommunication chipprofibus rs485

Get the latest price? We'll respond as soon as possible(within 12 hours)
close left right